Shake Rattle and Roll


AW Precision is pleased to announce the arrival of the PNEUMATIC PART CONVEYOR from Tecapres now available to the UK market.

This pneumatic part conveyor is a linear conveyor, which transports stampings of all kind and form also out of extremely small spaces. The simple handling of the conveyors allows a rapid and trouble free operation as well in the series- as in the large quantity production. The conveyor is robust and needs low-maintenance. Linear conveyors work according the principle of the relation between the velocity and the frictional resistance. Thereby different front or back acceleration values are used to transport a part on a groove out of sheet steel. By adjusting the stroke frequency the transport velocity can optimally be accommodated to the conditions on the spot. The transport groove can be arranged individually and a high wear of the conveyor band is avoided. Stampings which are fouled by oil can optionally be carried away on a corrugated transportation sheet steel. The conveyors work with oiled air pressure which is supplied by means of the maintenance unit and the oiler. The range of adjustment of the stroke frequency lies, depending on the type of the conveyor, between 10–180 strokes/minute. The vibrations of the transport groove have to be secured by groove supports. The transport velocity can be increased by a slight incline of the transport groove.

Tecapres Website